Hello! Welcome to the website of Shandong Textile Research Institute!
24-Hour Service Hotline
13475428416 15954827913
Advanced Search：
Medical Testing Equipment
Name：LFY-711A respiratory resistance tester
Details
The main purposeLFY-711A is used to measure the inhalation resistance and exhalation resistance of full face masks and half face masks under specified conditions. It is suitable for national labor protection equipment inspection agencies and mask manufacturers to conduct related tests and inspections on full face masks and half face masks.
Technical index
1. The instrument consists of an air source that can adjust the flow rate, a human head model prescribed by the standard, a two-pipeline system for inhalation and exhalation, and a respiratory resistance measurement system.
※2. The flow sensor has high sensitivity and a very small starting flow.
※3. The flow sensor chip adopts thermal mass flow meter, without temperature and pressure compensation, which ensures the high-precision measurement of the sensor. The range of the flow meter is -200L/min～200L/min, and the accuracy is ±2%.
※4. Multiple sensors are integrated on a single flow sensor chip, which greatly improves the range ratio of the sensor.
※5. The zero point stability of the flow sensor is high, with full range high stability, high accuracy and excellent repeatability, and it has the characteristics of low power consumption, low pressure loss and fast response speed.
6. The data recorder adopts a graphic dot matrix LCD with a resolution of 128×64 and a full Chinese interface, which is easy to operate.
7. There is 4M memory in the data logger for measurement value recording.
8. The micromanometer adopts two-wire system, with high accuracy, good stability, and safe and reliable explosion-proof design.
※9. The range and zero point of the micromanometer sensor are continuously adjustable externally, the damping is adjustable, there is no mechanical moving part, and the maintenance workload is small. The micro-pressure metering range is -1000Pa～1000Pa, and the accuracy is 1Pa.
※10. The whole instrument adopts special air circuit conversion components, which ensures the convenient and quick conversion of the exhalation and inhalation two-tube circuit system.
11. The suction volume of the suction pump is not less than 30L/min～160L/min.
12. The expiratory flow rate is 0～160L/min.
13. The head mold is adjustable in five directions.
14. Power supply: AC220V, 50Hz.
Applicable standards
BS EN 136-1998 Respiratory protective devices-Full face masks-Requirements, testing, marking
EN 149-2001+A1-2009 Respiratory protective devices-Filtering half masks to protect against particles-Requirements, testing, marking
Home
|
About
|
News
|
Products
|
Honor
|
Testing Standard
|
Special education
|
New Products
|
Recruitment
Address: 195 Shandong Road, Qingdao Postcode: 266032
Tel: 0532-85614755 (Sales switchboard) 0532-85635588 (sales manager)
Fax: 0532-85653787 He Hongxia (Senior Engineer) Deputy Director 15954827913 QQ: 179584685
After-sales service tel: 0532-85624778 15192792891
魯ICP備10203291號-10 
魯公網安備 37020302370559號 Support: LEIXUN